T6 Heat Treated Aluminum Arms

Xingtai Refined Machinery and Auto Accessory Co., Ltd. is one of the leading manufacturers and suppliers of t6 heat treated aluminum arms in China. We are committed to providing high quality auto parts made in China with low price. Welcome to wholesale bulk durable t6 heat treated aluminum arms from our factory. We also accept customized orders.

√NISSAN NAVARA 2008-2024

✔ This is high-strength heat-treated aftermarket suspension component, adjustable T6 heat-treated aluminum control arms, developed for heavy-usage lifted 4×4 off-road vehicles.

✔ T6 Heat Treated Aluminum Arms are specially optimized for off‑road users who want both light weight and high mechanical strength. Ordinary aluminum control arms may suffer from insufficient hardness under long‑term complex terrain load. T6 Heat Treated Aluminum Arms go through complete T6 heat‑treatment process to promote material hardness and toughness comprehensively. The structural performance of T6 Heat Treated Aluminum Arms is greatly improved, which effectively corrects suspension geometry deviation after vehicle lifting. It is compatible with various 4x4 modified vehicles, performing well in long‑distance overlanding, desert driving and daily road commute.

✔ T6 heat-treatment technology optimizes aluminum alloy internal grain, realizing higher hardness and anti-deformation capacity. Adjustable design supports accurate camber and caster calibration after lifting. It lowers unsprung mass to boost suspension reaction speed. Wear-resistant matching joints prolong service cycle. Hard-anodized outer surface resists sand scratch and chemical corrosion. It mitigates tire eccentric wear and enhances steering stability on bumpy roads.

✔ Applicable to multiple types of lifted 4×4 off-road vehicles. Widely used for desert crossing, long-distance overland touring, gravel road driving and daily mixed-condition use.

✔ Professional modification shop equipped with four-wheel alignment machine is required for installation. Lift the vehicle and secure it with safety supports, remove original OEM control arms. Install T6 Heat Treated Aluminum Arms, tighten each bolt strictly following official torque parameters. After installation, complete four-wheel alignment to adjust suspension angles. Conduct low-speed test drive, check suspension for abnormal knocking noise before off-road travel.

✔ 12-month limited warranty covers manufacturing defects, including raw-material defects and processing errors. Damage caused by collision, violent impact, improper installation and unauthorized disassembly will void warranty. Labor expense and shipping cost are not covered by warranty.

✔ Clean sand, mud and dirt after each off-road activity. Check bolt torque, bushing aging condition and ball joint clearance every 5000-8000 kilometers. Inspect arm surface for scratches and hidden cracks. Add lubricating grease for movable joints regularly. Replace cracked or aging bushings timely.

✔ Four-wheel alignment is indispensable after installation. Never exceed the maximum lift height allowed by product specification. Slow down when passing rocks and obstacles. Stop vehicle and inspect components immediately if suspension abnormal noise occurs. Not suitable for stock-height unmodified vehicles.

✔ All arms are finished with standardized T6 heat-treatment craft and pass load-simulation test. Strict quality inspection is carried out before goods delivery. Complete installation hardware is contained in package. Clear installation reference documents are provided. It supplies reliable high-strength upgrade scheme for 4×4 off-road lovers.

Hot Tags: t6 heat treated aluminum arms, China t6 heat treated aluminum arms manufacturers, suppliers, factory, Billet aluminum Control Arms, Front Forged Control Arms, Heavy Duty Upper Control Arms, OEM Replacement Iron Upper Control Arms, Painted Iron Control Arms, Painted Iron Upper Control Arms